ASTM A192 Boiler Tubes Alloy Cold-drawing Steel Pipe Factory
- Model
- ASTM A192/ ASME SA192
Item specifics
- Certification
- ISO
- Grade
- A192/ SA192
- Outside Diameter
- 1/4" - 4 3/4" [6.35 - 120.65 mm]
- Wall Thickness
- 0.02" - 0.375" [0.51 - 9.53 mm]
- Length
- 6M/ 12M or Customized
- Delivery State
- Cold Drawn
- Test Options
- Hydrostatic/ Hardness/ Flattening/ Flaring/ Flange
- Ends
- Plain/ Bevel
- Usage
- High-pressure Boiler and Superheater
- Surface
- Black/ Varnish/ Galvanized/ Oiled, etc.
Review
Description
Specification
ASTM A192 Boiler Tubes
Heat Treatment:
1)Hot Rolled tubes need not be heat treated.
2)Cold Drawn tubes shall be heat treated after the final cold-finishing at a temperature of 1200°F [650°C] or higher.
Standard Specification:
ASTM:American Society for Testing and Materials
ASME:American Society of Mechanical Engineers
ASTM A192 and ASME SA192, are universal and can be interused, and the contents inside are the same.
Application
ASTM A192 / ASME SA192 is a high pressure seamless carbon steel / manganese boiler tube(working pressure does not exceed 9.8Mpa and the working temperature between 450 ℃ -650 ℃) used in super heaters, water wall panels, heat exchangers, condensers, marine application, refineries, paper pulping, petrochemical applications, pressure vessels, and general engineering applications.
Production Process Introduction
Cold Drawn Seamless Mechanical Tubing (CDS) is a cold drawn 1018/1026 steel tube which offers uniform tolerances, enhanced machinability and increased strength and tolerances compared to hot-rolled products. Produced from hot rolled 1026, the cold drawing process increases the tube's physical properties and offers better tolerances and reduced machining allowances over hot finish seamless.
CDS seamless tube and pipe is produced by piercing hot billets and subsequent rolling which reduces their diameter and elongates them. This material is then passed through a die and over a mandrel plug to produce an accurate size and gauge which is the essence of the cold drawing process.
Example Size
Out Diameter |
Wall Thickness
|
||
Inch |
mm
|
mm
|
|
1/4" |
6.35
|
0.51/ 0.89/ 1.24/ 1.64
|
|
1" |
25.4
|
1.24/ 1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96
|
|
2" | 50.8 | 1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53 | |
3" | 76.2 | 1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53 | |
4 3/4" | 120.65 | 5.56/ 6.35/ 7.14/ 7.95/ 9.53 | |
One-stop service to facilitate your purchase
The Baolai Group continues to provide service and support after your purchase. To save you time, we offer you numerous value-added services such as processing, logistics management and testing.
Processing Services:
- √OEM & ODM
- √Protective Coatings
- √Saw and Flame Cutting
- √Beveling, Threading and Grooving
- For more information, please contact our service team.
