## Welding Neck Flange, High-hub Flange Manufacturer

Welding Neck Flange is a butt-welding flange with best design among currently available flanges because of its unique structure

Model:ASME/ ANSI B16.5

Found 11 products about # Pipe Fittings

Welding Neck Flange is a butt-welding flange with best design among currently available flanges because of its unique structure

Model:ASME/ ANSI B16.5

Slip-on flanges have a lower hub because the pipe is inserted into the bore of the flange before welding.

Model:ASME/ ANSI B16.5

The reducing tee is used to change the size of the fluid branch.

Model:ASME B16.9

Inner circumferences of the nozzles at both ends of the eccentric reducer are generally used for horizontal liquid pipes.

Model:ASME B16.9

Equal Tee (or straight tee), means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.

Model:ASME B16.9

Concentric Reducer used for adjust the fluid rate and speed by welded a large pipe on one end and a smaller on the other end.

Model:ASME B16.9

180° eblow usually results in low pressure, its applications is limited to minimum deposition and low turbulence systems.

Model:ASME B16.9

It's often used for connection of hoses to water pumps, deck drains, and valves.

Model:ASME B16.9

Long Radius (LR) Elbow is also called LR elbow – means the radius is 1.5 times the pipe diameter.

Model:ASMEB 16.9

Long Radius (LR) Elbow is also called LR elbow – means the radius is 1.5 times the pipe diameter.

Model:ASME B16.9

Long Radius (LR) Elbow is also called LR elbow – means the radius is 1.5 times the pipe diameter.

Model:ASME B16.9